Nov 23, 2023
Today we're building the 3D printed front wheel drive RC Racing Buggy by designer Tahustvedt and we're going to do it as cheaply as we can! The car performs really well and here's a list of products we used in the build:$30 - 27T Motor+ESC combo - https://rcprinter.com/products/540motor-60a-esc-combokit$10 - 2 Driveshafts - https://rcprinter.com/products/4driveshaft-set-formkultra$25 - Metal Diffe
Nov 10, 2023
Today we've built the new 3d printed rc zodiac style boat by 3DSets known as Skippy! This video goes through a complete build of the RC boat from start to finish including building the jet drive outboard motor and fastening the 3 hull pieces together with filament and screws. If you're looking for the 3d files for Skippy boat please check out the designer's website at www.3dsets.comif you're inter
May 05, 2023
Today we're building the all new SkeeRide 2 by BuildItBetter. This video is not meant as a build guide as there's a few times in the video I have to go back and redo some things. This was my first SkeeRide 2 build so it was a bit of a learning experience. Build includes the initial test-run at the end of the video.
If you're looking for the files to build your own SkeeRide 2 you can find them her
Mar 07, 2023
Today we're building the 3D Printable Max Team RC Van by 3DSets with vintage A-team coloring. This is a complete build and first run video for the Van including installation of all plastic pieces, fasteners, bearings, drive belts, and electronics.
To build this van we used this build kit from RCPrinter: https://rcprinter.com/products/3dsets-max-team-build-kits?variant=42811085783201
For a contro
Feb 15, 2023
Yeah that's right we printed a remote controlled van eerily similar to the A-Team one... I pity the fool that doesn't watch this video! Watch for the full build video coming soon!
Build Kits: https://rcprinter.com/products/3dsets-max-team-build-kits
Design Files: https://3dsets.com/product/model-14-max-team/
Get inspired to build your own 3d printed RC projects at www.rcprinter.com
Feb 09, 2023
Happy Youtube-iversary RC Printer! Today we're reviewing all the 3D printed RC vehicles we've built in the last 12 months and saying a few quick words about each of them. Buckle up and enjoy the trip down memory lane.
Are you considering your own 3D printed RC build? Check out our build kits at www.rcprinter.com
List of builds:
1 - Bamboo Toyota FJ by 3D Sets
Feb 02, 2023
In this video we build the all new Tarmo5 which is a complete redesign from the Tarmo4. Video includes complete assembly plus the initial trial run and my first impressions of the vehicle with some tips for your own build.
RCPrinter Build Kits for Tarmo5 can be found here: https://rcprinter.com/products/tarmo5-build-kits?variant=42857907519649
Tarmo5 Build information can be found here: https://w
Jan 25, 2023
Playing around in the snow with the RCTF Snowcat.
Jan 20, 2023
Today we're building the Caramel CRC by the friendly designers at Printed Nest. This build video covers the complete construction of the vehicle from start to finish as well as a little bit of testing it out and my initial impressions.
If you're looking to build one for yourself you can get the model files here: https://www.printednest.com/caramel-crc
Check out the designer's youtube channel here
Jan 12, 2023
In this video we do some outdoor testing of our Robak 2 and upgrade a few components including drive cups, differentials, tires, driveshafts and steering arms and then we finish off testing a few different motor/esc combinations with different pinion gears to find what works best.
The drive combo we ended up with was:
Nov 25, 2022
Today we build the dukedoks Dodge Challenger. This is a complete build including assembly of all plastic and hardware, installation of electronics and a nifty Tamiya lighting kits, and finishing paint.
If you're looking for more ideas for cool 3D Printed RC projects like this one to build, kits, parts or instructions check out our website at www.rcprinter.com
Challenger body: https://dukedoks.c
Nov 23, 2022
This is a video tutorial on how to upgrade your Skeeride 3D printed RC snowmobile from a gear transmission to a belt drive.
If you're looking for cool ideas for 3D printed RC projects like this one to build, kits, parts or instructions on how to build them check us out at www.rcprinter.com
3D Printed Mod pieces from Skeeride files I've used include:
1. Frame: mod_jlatourn86_frame-v3_belt_drive
Nov 09, 2022
Today on RCPrinter we're 3D printing, building and doing an initial trial run of the Veltro touring car by 3D designer Tahustvedt. This is a complete build including paint and decals. The Veltro is a remake of the popular MkUltra car by the same designer to be a touring car rather than a buggy.
If you're looking for more cool idea of 3D Printed RC vehicles to build, kits, parts or instructions on
Oct 26, 2022
Today we're doing a complete build for the Robak 2 3D printed 4WD RC Car. This is a full start to finish build video including installation of the chassis, front and rear diffs and suspensions, metal drivetrain and steering components, electronics, body, 3D printed TPU tires and more!
If you'd like to build one of these for yourself here's where you can find the files I used in this video:
Oct 13, 2022
Today we're building the 3D Printable Foss Catamaran from Printfully3D. This is a start to finish build video including gluing the hull, filling and painting, adding the electronics and hardware and plumbing the water cooling. We finish it off with a quick video of a successful maiden voyage!
If you're looking for cool ideas for 3D Printed RC projects to build, kits, parts, or instructions on how
Oct 07, 2022
Here we have a complete start to finish build video for the MkUltra 3D Printed Racing buggy. Includes installation of all 3d printed plastic pieces as well as all hardware and electronics required to complete the build.
If you're looking to build one of these beauties yourself check out our parts and kits here: https://rcprinter.com/products/mkultra-build-kits
If you're looking for the design fi
Sep 28, 2022
In this video we test out a few different motors in our 3D Printed RC Jetboat designed by Bashtech and settle on a winner for our current uses. We take the winning combination out to the lake for a good session over the low Shuswap water.
If you're looking for cool ideas of 3D printed RC projects to build, kits, parts or instructions check out our website at www.rcprinter.com
If you're looking f
Sep 09, 2022
Today we build a 34" 3D printed RC boat. The designs were acquired from thingiverse here: https://www.thingiverse.com/thing:2337209 Thanks a tonne to the designer Sergey2484 for his awesome work. This build video covers glueing, sanding, painting, decals, and installation of hardware and electronics. We also take the boat out for its maiden voyage on the water to see how she goes! Finally the vide
Aug 16, 2022
In this video we take you through the build and initial test run of our 3D Printed Jetboat by designer Bashtech. The boat functions quite well and is a tonne of fun to drive however the little motor I put in there was too small and we ended up burning it out pretty quickly so we'll have to upgrade it in the next video and do a longer test.
The build is pretty simple for this boat. You glue the ma
Jul 29, 2022
Build video of the 3DSets Jumbo Car Hauler. All plastic parts are 3d printed but it requires screws, bearings, shocks, and tires. The design files come complete with a storage box or spare tire mount, clip-in locks for the ramps, and your choice of decking. For our build we went with wood pla which we attempted to stain and finish with Danish oil and Varathane.
If you're looking for cool ideas of
Jul 26, 2022
In this video we rebuild our Eclipson Model T plane... a few times... get some crashes on camera and give you some tips on building and re-building your own. We also try out some new filaments including regular PLA and PETG to see what the weight differences are and how they perform.
If you're looking for cool ideas for 3D printed RC projects to build check us out at www.rcprinter.com
If you wan
Jul 07, 2022
Jul 06, 2022
In this video we test out our RC Test Flight Snowcat outdoors and upgrade to 6S from 3S to see how much of a difference it makes to the performance.
Spoiler Alert: The difference is large.
The new ESCs we're running are these at 50A and so far they're working really well: https://www.aliexpress.com/item/4000235650720.html
If you're looking for cool ideas of 3D printed projects to build, kits,
Jun 30, 2022
This time we're building the RCTestFlight SnowCat and we're showing you how we did it all from start to finish including building the tracks, adding the polycarbonate shell, set up of the electronics and receiver, installing the motors and gear meshing and much more. Stay tuned to the channel because we're going to get it outside for a good bash session really soon.
If you're looking for cool ide
Jun 28, 2022
Jun 24, 2022
Jun 23, 2022
SPEED TANK BUILD KITS ARE NOW AVAILABLE AT RCPRINTER HERE: https://rcprinter.com/products/speed-tank-build-kits
Today we put some roller, drive gear and track tensioner upgrades on our 3d printed RC speed tank and take it bashing through the back forest. Motors got a little hot but everything is definitely working better than originally.
If you're interested in cool ideas of 3d printable RC proj
Jun 17, 2022
Complete build of the Eclipson Model T including electronics installation and wheels and pontoons. Our initial build here is in LW-PLA or lightweight PLA which was a very interesting material to test out.
This was our first 3D printed RC plane and we definitely made our share of mistakes. Can't wait for the next one!
If you're looking for kits, parts, instructions or ideas for cool 3D printed R
Jun 10, 2022
Today we upgrade our Tank with some brushed 540 motors with a higher number of turns, 45 instead of 27, to help reduce the build up of heat. For ESCs we move back to some 60A Surpass Hobby land escs. We also convert to a pistol style controller and try to set the right mix.
If you're looking for cool ideas of 3D Printed RC Projects to build, kits, parts or instructions on how to build them check
Jun 06, 2022
In this video we compare a couple of 3D Printable RC Snowmobiles. The Skeeride by BuildItBetter has been around for over a year now but the Alpha-6 by RC Creations just became available in the last few months. There are positives and negatives to both as you will soon find out.
You can check out BuildItBetter on Youtube here: https://www.youtube.com/c/BuildItBetter3D
You can check out RC Creation
Exclusive content just for you!